User guide

Canopy System User Guide Configuring a Point-to-Multipoint Link for
Test
pmp-0229 (Mar 2013)
193
3. Click the Go To Next Page => button.
RESULT: The AP responds by opening the Radio Carrier Frequency tab.
An example of this tab is shown in Figure 62.
Figure 62: Radio Carrier Frequency tab of AP, example
4. From the pull-down menu, select a frequency for the test.
5. Click the Go To Next Page => button.
RESULT: The AP responds by opening the Synchronization tab. An example of
this tab is shown in Figure 63.