User guide

Viewing Typical Layouts Accessing Features
108
pmp-0229 (Mar 2013)
Monitoring Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
List of registered SMs/BHSs with full data,
with hot links to SMs/BHSs
AP BHM Configuration/General
multiple
objects
Abbreviated list of SMs/BHSs, with hot links
to SMs/BHSs
AP BHM Configuration/General
multiple
objects
Received power level indication All radios Home/Session Status (in master) yes
LEDs on modules to display states and
activity
All modules no no
Received interference level indication (jitter) All radios Configuration/General yes
Configurable web-page auto-refresh All modules Configuration/General yes
SM registration failures AP BHM Statistics/Reg Failures yes
Event log All modules Home/Event Log no
Operator can use own logo on GUI pages All modules no yes
Operator can use own style sheets for GUI All modules no yes
Jitter consistent regardless of operation
(1X or 2X)
All radios no no
Link status table with bidirectional data for all
links
AP Tools/Link Status no
Point-to-Point Protocol over Ethernet
(PPPoE) client
SM Configuration/PPPoE yes
Maximum number of SMs registered since
last reboot displayed
AP Home/General Status no
Overload statistics AP Statistics/Scheduler
Per-SM query (instead of Link Status
table)
AP Tools/Link Status no
Bridge Management Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Configurable bridge entry timeout All radios Configuration/General yes
Bridging table statistics (up to 4096 entries) All radios Statistics/Bridging Table yes
Disable bridging on BHs BHM BHS Configuration/General yes
SM Isolation Features (preventing
communication between SMs)
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
SM isolation at AP AP Configuration/General yes
SM isolation at CMM
CMMmicro
CMM4
Configuration/General yes