User guide

Canopy System User Guide Viewing Typical Layouts
pmp-0229 (Mar 2013)
105
6,200 packets per second on P10 or P11
firmware (6,300 in PMP 400 Series modules
without VLAN enabled; 5,300 with VLAN
enabled; 6,200 in PTP 100 Series wireless
Ethernet bridges at 2- and 4-Mbps
throughput; 4,600 in CAP 09130 and
CSM 09130)
All radios no no
Settable downlink broadcast repeat count AP Configuration/Radio yes
RF Configuration Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Configurable center-channel carrier
frequency
AP BHM Configuration/Radio yes
255 configurable, prioritized "color codes" to
manage SM to AP (or (BHS to BHM)
registration
All radios Configuration/Radio yes
16 configurable "sector IDs" for
administrative convenience
AP BHM Configuration/Radio yes
Configurable range settings (determines air
turn-around time)
AP Configuration/Radio yes
Configurable downlink data % (determines
transmit/receive ratio)
AP BHM Configuration/Radio yes
Configurable number of reserved control
slots (manages contention for uplink
requests)
AP Configuration/Radio yes
Configurable frequency scan list at SM SM BHS Configuration/Radio yes
Large Virtual Circuit Data Queue SM Configuration/Radio yes
Packet stats - RF interface All radios Statistics/Radio yes
Installation Color Code AP BHM Configuration / Radio yes
Timing Features
Module
Type(s) Controlled in GUI Page/Tab
SNMP
Control
Configurable AP/BHM sync source - Sync
over Power over Ethernet, self-sync, or sync
cable
AP BHM Configuration/General yes
"Remote AP" support, including timing pulse
propagation through SM/BHS
SM BHS Configuration/General yes