User guide

Release9.5ReleaseNotes



Issue2,October2009  Page5
Table 10: Release 9.5 operation based on Region Code and frequency band ............ 43
Table 11: Radios upgradeable to Release 9.5 .............................................................. 46
Table 12: 5.4- and 5.2-GHz interfering frequencies ...................................................... 52
Table 13: US FCC IDs and Industry Canada Certification Numbers and covered
configurations ................................................................................................ 59
Table 14: Disclosure table ............................................................................................. 65
Table 15: Exposure separation distances ..................................................................... 66
Table 16: Calculated exposure distances and power compliance margins .................. 67
List of Figures
Figure 1: Board Type on modules running Release 8. .................................................. 10
Figure 2: Scheduling option – if viewable, indicates this is a P9 Board. ....................... 10
Figure 3: Telnet – Version showing hardware platform. ................................................ 10
Figure 4: Configuration => General page with Region set to United States ................. 15
Figure 5: DHCP Relay Agent via Configuration => General on AP. ............................. 17
Figure 6: Enable Large VC data Q via Configuration => Radio on SM, BHM and BHS.18
Figure 7: outdiscard Count via Statistics => Radio on SM, BHM and BHS. ................. 18
Figure 8: AP Pre-shared Key option on AP’s Configuration => Security tab ................ 21
Figure 9: Configure Hide Site Information via Configuration => SMNP on SM. ............ 22
Figure 10: Configure up to 5 Prizm Authentication Servers via Configuration =>Security
on AP. ........................................................................................................... 23
Figure 11: Configure Multiple Color Codes via Configuration => Radio on SM. ........... 24
Figure 12: Configure SM Color Code Rescan and Wait Period via Configuration =>
Radio on AP. ................................................................................................. 26
Figure 13: Enter GPS Coordinates via Configuration => General on AP, SM and BH. 27
Figure 14: Enable or Disable Idle Sessions via Home => Session Status on AP. ........ 27
Figure 15: Quick login via Home => General Status on AP, SM and BH. ..................... 28
Figure 16: Only allow SMs running R9.5 or above via Configuration => Radio on AP. 29
Figure 17: Clear Statistics button via Statistics on AP, SM and BH. ............................. 30
Figure 18: Clear Statistics on AP - web tabs that can be cleared are shown in red. .... 30
Figure 19: Clear Statistics on SM - web tabs that can be cleared are shown in red. .... 30
Figure 20: Clear Statistics on BH - web tabs that can be cleared are shown in red. .... 30
Figure 21: Upgrade path for operating sectors ............................................................. 47
Figure 22: Benchmark test setup .................................................................................. 57