User guide

Release9.5ReleaseNotes



Issue2,October2009  Page49

 Network Updater Tool Release 3.20 for Windows

 Network Updater Tool Release 3.20 for Linux

 Network Updater Tool Release 3.20 Release Notes

2. Install CNUT Release 3.20 on Windows or Linux using the CNUT release notes.

3. If you do not have a previously stored network archive file within CNUT, add your Canopy

infrastructure elements (APs, BHs, and CMMs) to the network root and Move and Modify

the elements until you have captured your network.

IMPORTANT! Pay particular attention to the connectivity that you establish in the

network tree. This should be the connectivity as viewed at the point from where you connect

to the network to perform the upgrade. If you are connecting at your POP, this will be the

same as your network hierarchy. If you are connecting at some point other than your POP, it

should reflect connectivity from that point. When CNUT discovers the network and when it

steps through the infrastructure elements during an upgrade, it relies on the connectivity

information you enter in the network tree.

7.2.2 ObtainingandPreparing Prizm 

1. Download Prizm 3.2 and Prizm 3.2 Release Notes.

2. From the Canopy tab of http://motorola.wirelessbroadbandsupport.com/software,

download

 Prizm 3.2 and Prizm 3.2 Patch 2

 Prizm 3.2 Release Notes.

3. Install Prizm 3.2 Patch 2 using the Patch Release Notes.

4. If you do not have a previously stored network archive file within Prizm, add your Canopy

infrastructure elements (APs, BHs, and CMMs) to the network root and Move and Modify

the elements until you have captured your network.

7.3 OBTAININGUPGRADEPACKAGES

To download the Canopy software to your computer, perform the following steps:

1. Go to http://motorola.wirelessbroadbandsupport.com/software.

2. Follow the directions on that page to access the software download page.

3. On the software download page, select the appropriate package or packages. Options

include

 Release 9.5 FSK Software - DES

 Release 9.5 FSK Software - AES

 Release 9.5 OFDM Software - DES

 Release 9.5 OFDM Software - AES

PMP 100 and PTP 100 series (Canopy FSK radios) use the FSK software.

PMP 49400 and 54400 radios (4.9 GHz and 5.4 GHz) use the OFDM software.

PTP 49200 and 54200 radios (4.9 GHz and 5.4 GHz) use the OFDM software.

4. Click Accept User Agreement and Request Download Links.

RESULT: You will receive an email with a link or links to the software.