User guide

Release9.5ReleaseNotes



Issue2,October2009  Page45
6 CanopyMIB
The Canopy Enterprise MIB (Management Information Base), consisting of 5 MIB definition files,
supports SNMP access to Canopy modules. The MIB files are available for download from the
Canopy tab of http://motorola.wirelessbroadbandsupport.com/software
.
Detailed information on the Canopy MIBs is available at
http://motorola.wirelessbroadbandsupport.com/support/online_tools
.
MIB files are used by Network Management Systems and Element Management Systems, such
as the Motorola Prizm system, to support a host of surveillance, monitoring, control, and
operational tasks.
Information on the Motorola Prizm element management system is available at
http://motorola.wirelessbroadbandsupport.com/products/prizm
.
Prizm documentation and installers are available for download from the Canopy tab of
http://motorola.wirelessbroadbandsupport.com/software
.
If you are using Prizm: Prizm software includes the MIB information. You do not need to load
MIB files.
If you are using an SNMP network management system (NMS) or element management
system (EMS) other than Prizm: Load the MIBs per the instructions for your NMS or EMS.
Important! When loading the Canopy MIB files
1. First load the standard MIB files.
2. Then load the Canopy MIB files.
Some NMSs are not sensitive to order, but some require a specific loading order to build a MIB
tree. Loading in the recommended order avoids any problems arising from loading sequence.