User guide

Release9.5ReleaseNotes



Issue2,October2009  Page39
5 NotesandReference
5.1 NOTES
New notes for Release 9.5 are listed in Table 8 and previous notes are listed in Table 9.
Table 8: Notes
Ref # Description Discussion and Recommendations
11383 SNMP Set of
Region Code
fails in some
cases
Consistent with the changes described above for Release 9.5, attempting
an SNMP Set of the Region Code of a US 5.2-, 5.4-, or 5.7-GHz AP or
BHM that was upgraded to Release 9.5 will return a “failed” response.
SNMP Gets continue to return correct responses.
9652 Uplink Efficiency
is just 88% for
the 64Bytes
Packet Length
(4.9GHz OFDM
Only)
This is a reporting issue only when conducting a link test with 64Bytes
packets while the radio is operating in 3X modulation. If the radio is
conducting a link test while operating at 2X it will report 100% link
efficiency.
11699 Updating
Community
Strings on the
Web GUI
To flip-flop the read/write and read-only community string names, it is
necessary to change one community string to a temp name first before
switching community string names.
10333 Link Status Page The AP or SM Tools => Link Status Page displays NA for Latest Remote
Link Efficiency Percentage. To update, either turn on web page auto
update or press F5 to refresh the web page.
7427 AP Sync Input Remote AP receives sync from SM by setting SYNC Input to Timing Port.
However; if this is incorrectly configured as SYNC input to Power port the
remote AP will still correctly receive SYNC.