User guide

Release9.5ReleaseNotes



Issue2,October2009  Page31
2.18 POP‐UPTOOLTIPS
The following list of web pages contains tool tip pop-ups to explain specific radio features.
 SM - Packet Filter Types located in Configuration => Protocol Filtering
 SM - Filter Direction located in Configuration => Protocol Filtering
 SM/BH - Large VC data Q located in Configuration => Radio
 AP - Subscriber Color Code Rescan located in Configuration => Radio
 AP - Subscriber Color Code Wait Period for Idle located in Configuration => Radio
 AP - Always use Local VLAN Config located in Configuration => VLAN
Note: Enable VLAN to see Always use Local VLAN Config tool tip
 AP/SM/BH – Latitude, Longitude and Height tool tip in Configuration => General
2.19 900‐MHZLIMITEDAP
Release 9.5 supports the new 900-MHz Limited AP radio model (9060APC). This AP is known as
an APL device type and can register up to ten 900-MHz SMs. If an eleventh SM tries to register to
the 900-MHz Limited AP, it will receive a registration grant failure with either reason “SM Limit
Exceeded” or “Auth Failure”. Refer to section 2.6
for more details on registration failures.
The 900-MHz Limited AP is sold as a kit with one 900-MHz Limited connectorized AP and ten
900-MHz connectorized SMs. A 900-MHz Limited AP can be upgraded to an Advantage AP via
an orderable feature key.
When using the new 900-MHz Limited AP, consider using the new AP/SM Pre-shared Key
Authentication with different keys for different sectors to force the desired mapping of SMs to APs
and avoid SMs being denied service by their AP's 10-SM limit being filled with the "wrong" SMs.
Refer to section 2.7
for more details on AP/SM Pre-shared Key authentication.