User guide

Release9.5ReleaseNotes



Issue2,October2009  Page27
2.12 GPSCOORDINATESSTOREDINAP,SMANDBH
GPS coordinates can be manually entered into each AP, SM and BH.
Figure 13: Enter GPS Coordinates via Configuration => General on AP, SM and BH.
This table shows the three GPS coordinate OIDs.
2.13 CONFIGURATIONTOHIDEIDLESUBSCRIBERSONAP
Idle subscribers can be quickly hidden (without a reboot) from the Home => Session Status list on
the AP by selecting Enabled. This can be useful to clean up the Session Status List to only show
active subscribers. It is also useful when using the AP/SM Pre Shared Key configuration since
any SMs which fail authentication will show up as idle in the Session Status List.
The default value is Enabled.
Figure 14: Enable or Disable Idle Sessions via Home => Session Status on AP.