User guide

Release9.5ReleaseNotes



Issue2,October2009  Page13
Enhancement
Type / Section
Enhancement Summary
Network
Redundancy
2.11
Color Code Priority on SM SMs have a total of ten configurable color codes which
can be tagged as Primary, Secondary or Tertiary. In
earlier releases, there was one primary color code.
Usability
2.12
GPS Coordinates Stored in
AP, SM and BH
AP, SM or BH contain input fields for Latitude, Longitude
and Height in the Configuration => General web page.
Usability
2.13
Configuration to Hide Idle
Subscribers on AP
AP configurable option to hide idle subscribers from the
Home => Session Status web page.
Usability
2.14
Quick Login on AP, SM and
BH
Login is now directly on the left sidebar on the main web
splash page eliminating the extra step to click login button.
Usability
2.15
Obsolete Unused OIDs Six OIDs that are no longer used are no longer in the
MIBs.
Usability
2.16
Only Allowing AP to Register
SMs that are on at least
R9.5
AP can reject SMs upon registration if they are running a
software release earlier than R9.5. The option is
configurable in the AP Configuration =>Radio tab. Default
is Disable.
Usability
2.17
Clear Statistics AP, SM or BH statistics can be cleared for each statistics
tab. In earlier releases statistics were only cleared upon
reboot.
Usability
2.18
Pop-up Tool Tips Several radio web pages have roll over tool tip pop-ups to
explain specific radio features.
Product
2.19
900-MHz Limited AP 900-MHz Limited AP (connectorized) supports up to 10
registered 900-MHz SMs. A feature key is orderable to
upgrade a 900-MHz Limited AP to an Advantage AP.
2.2 PERFORMANCE–PACKETSPERSECOND
Packet per Second (PPS) performance for Release 9.5 is the same as for recent releases.
Benchmark values are shown in Table 4.
Table 4: Packet per Second (pps) performance
Product
Hardware series
P11 or P10 P9
PMP 5x100 and PMP 24100 6200 3500
PMP 5x100 and PMP 24100 with
VLAN
5200 3200
PMP 09100 (900 MHz) 4600 3600
PTP 5x100 and PTP 24100 6200 3200
1