Specifications

THERMOCOUPLE THERMOMETERS
• HX381 is a single input thermometer and
HX382 is a dual input thermometer
• Direct or differential measurements to 0.1°C/0.1°F
resolution over the entire measurement range
• Accuracy to 0.5%
• Differential Temperature (T1-T2) mode freezes display
for convenient viewing (HX382)
• Display maximum reading plus Data Hold
• Scan Function (T1, T2, T1-T2, Max, Hold….) (HX382)
• Large LCD display with backlight
• User selectable °C or °F
• User selectable 0.1°C or 1°C (0.1°F or 1°F) resolution
• Accept K-type thermocouples
• Both orders include 9V battery and holster
• Thermocouple probe extra
SPECIFICATIONS
Order No. HX381 HX382
Mfg. No. ST-601B ST-612
Temperature Range: -50 to 1300°C -58 to 2000°F
Resolution: 1°C/°F or 0.1°C/°F
Accuracy: ±(0.5 % rdg. ± 1°C/±2°F)
Humidity Range: 0 to 100% RH
Resolution: 0.1% RH
Accuracy: ±3.5% RH
Power Supply: 1 x 9V battery
Dimensions: 165 x 76 x 43 mm (HWD)
Weight: 403 g
HX382
HX381
SURFACE PROBES
• Ribbon-style surface probe
• Maximum Temperature: 400°C
Order No. HN209
Mfg. No. LS-109
• Spring-loaded probe is ideal for high temperature
surface measuring requirements
• Extremely fast response time
• Not recommended for use as an immersion probe
• Maximum Temperature: 500°F
Order No. HN210
Mfg. No. LS-139
RIGHT ANGLE
SURFACE PROBE
• Unique right angle design allows temperature of
hard to reach areas to be taken
• Great for monitoring temperature inside pipes, also
flat surfaces, without keeping hands over heated area
• Maximum Temperature: 400°C
Order No. HN211
Mfg. No. LS-104
AIR/GAS PROBE
• Specially designed to measure air or gases in heating
and cooling units, ovens and engine exhausts
• Perforated shield permits fasts response while
providing exceptional element protection
• Maximum Temperature: 800°C
Order No. HN212 Mfg. No. LS-103
NEEDLE TIP
PENETRATION PROBE
• Medium gauge hypodermic needle tip, used
to measure softer food stuffs, rubbers and solids
• Ideal for use in industrial, laboratory and
chemical environments
• Maximum Temperature: 800°F
Order No. HN213 Mfg. No. LS-134A
GENERAL PURPOSE
IMMERSION PROBE
• Used to measure both air or liquids, but is best
recommended for immersion applications
• Excellent for checking temperature of oils,
water and non-corrosive fluids
• Maximum Temperature: 700°C
Order No. HN214 Mfg. No. LS-107
Instruments
327
16300E
1237_315_328_Eng 12/16/06 1:11 PM Page 327
905-814-6859 - 1-866-517-3289 - www.marcur.com