Specifications

Press [1] if you want to mount or press [2] if you want to exit
6 Press 1 will prompt for the mount point. For example, /mnt is prompted. Press Enter to mount the encrypted
volume at the selected point. After mounting, an option to return to the Main Menu or Exit is provided.
Press 2 to exit the utility without mounting.
7 If the volume is mounted on the desktop, then that volume can be provisioned with files for deployment.
8 Unmounted volumes can then be copied to the device and subsequently mounted using the Secure Storage
Administrator by providing the encryption key used.
Mounting an Image
Procedure:
1 From the Main Menu, select item 2. The following appears:
Please enter EFS file name (e.g. /tmp/1.efsmot): <volume name>
Please enter encryption key (64-bytes hex value):
Please enter mount path (e.g. /mnt): <existing mount point>
DONE - OK
2 Enter the name of the volume and then press Enter.
3 The utility then prompts for the encryption key. This is a 64 byte hexadecimal value. Enter a string of 64
hexadecimal digits and then press Enter.
4 Enter the mount point where to connect the volume into the file system and then press Enter. The example
of /mnt is provided.
Unmounting an Image
Procedure:
1 From the Main Menu, select item 3. The following appears:
Please enter EFS file name (e.g. /tmp/1.efsmot): <volume name>
DONE - OK
2 Enter the name of the volume to unmount.
3 Press Enter.
Administrator Utilities | 105
MN000887A01 | June 2014 | Send Feedback