User guide

313

CONFIG Commands

set radius radius-port

port_number

Speciﬁes the port on which the RADIUS server is listening. The default value is 1812.

VLAN Settings

These settings are supported beginning with Firmware Version 7.4.2, and enhanced in

Firmware Version 7.6.1.

You can create up to 32 VLANs, and you can also restrict any VLAN, and the computers on

it, from administering the Gateway. See “VLAN” on page 111 for more information.

set vlan name

string

Sets the descriptive name for the VLAN. If no name is speciﬁed, displays a selection list of

node names to select for editing.

Once a new VLAN name is speciﬁed, presents the list of VLAN characteristics to deﬁne:

• id – numerical range of possible IDs is 1 - 4094, beginning with Firmware Version 7.6.1.

• type [ by-port | global ] – beginning with Firmware Version 7.6.1, global type is avail-

able, as well as by-port

• admin-restricted [ off | on ] – default is off. If you select on, administrative access to

the Gateway is blocked from this VLAN.

• port – VLAN’s physical port or wireless SSID.

• tag – beginning with Firmware Version 7.6.1, packets transmitted from this port through

this VLAN must be tagged with the VLAN VID. Packets received through this port des-

tined for this VLAN must be tagged with the VLAN VID by the source. The tag option is

only available on global type ports.

• priority - beginning with Firmware Version 7.6.1, allows you to enable or disable packet

prioritization based on any 802.1p priority bits in the VLAN header to prioritize packets

within the Router’s internal queues, according to DiffServ priority mapping rules.

• promote - beginning with Firmware Version 7.6.1, allows you to enable or disable writing

any 802.1p priority bits into the IP-TOS header bit ﬁeld for received IP packets on this

port destined for this VLAN. Write any IP-TOS priority bits into the 802.1p priority bit

ﬁeld for tagged IP packets transmitted from this port for this VLAN. All mappings

between Ethernet 802.1p and IP-TOS are made according to a pre-deﬁned QoS mapping

policy.