User guide

29
Configuring the Netopia Gateway
Set up the Netopia Pocket Gateway
Your Netopia 3342N/3352N Pocket Gateway comes with its own installation wizard.
• If you are using Windows 98, insert the CD.
• If you are using Windows XP, Windows 2000, or Windows NT, you don’t even need the
CD.
Follow these easy setup steps:
1. Plug the Netopia Pocket Gateway into a USB port on your PC.
2. Whether you use the CD (Windows 98) or not (all other Windows versions), on
Windows-based PCs, the Netopia Installation Wizard will launch automatically.
The Netopia Installation Wizard will assist you to configure your PC to work with the
Netopia pocket Gateway. Follow the on-screen instructions.
To proceed, click the Next button.
The Netopia Installation Wizard performs a series of checks on your system and then
will install USB drivers for your connection.
3. Place the Netopia Pocket Gateway near your PC so you can see it easily.
Make sure any cables are kept away from power cords, fluorescent lighting fixtures, and
other sources of electrical interference.
4. When the wizard prompts you, connect the RJ-11 Telephone Cable from the DSL
port on the Netopia Pocket Gateway to the ADSL phone jack.
The DSL indicator light should blink for up to two minutes and then come on solid green
once the device is connected to your computer.