User guide

248
show ip state-insp
Displays whether stateful inspection is enabled on an interface or not, exposed addresses
and blocked packet statistics because of stateful inspection.
show ipmap
Displays IPMap table (NAT).
show log
Displays blocks of information from the Netopia Gateway diagnostic log. To see the entire
log, you can repeat the show log command or you can enter show log all.
show memory [all]
Displays memory usage information for your Netopia Gateway. If you include the optional
all argument, your Netopia Gateway will display a more detailed set of memory statistics.
show pppoe
Displays status information for each PPPoE socket, such as the socket state, service
names, and host ID values.
show security-log
Displays blocks of information from the Netopia Gateway security log.
show status
Displays the current status of a Netopia Gateway, the device's hardware and software revi-
sion levels, a summary of errors encountered, and the length of time the Netopia Gateway
has been running since it was last restarted. Identical to the status command.
show summary
Displays a summary of WAN, LAN, and Gateway information.