User guide

245

SHELL Commands

reset diffserv

Resets the Differentiated Services (diffserv) statistics.

reset enet

Resets Ethernet statistics to zero

reset heartbeat

Restarts the heartbeat sequence.

reset ipmap

Clears the IPMap table (NAT).

reset log

Rewinds the diagnostic log display to the top of the existing Netopia Gateway diagnostic

log. The reset log command does not clear the diagnostic log. The next show log com-

mand will display information from the beginning of the log ﬁle.

reset security-log

Clears the security monitoring log to make room to capture new entries.

reset wan-users [all |

ip-address

]

This function disconnects the speciﬁed WAN User to allow for other users to access the

WAN. This function is only available if the number of WAN Users is restricted and NAT is on.

Use the all parameter to disconnect all users. If you logon as Admin you can disconnect

any or all users. If you logon as User, you can only disconnect yourself.

restart [

seconds

]

Restarts your Netopia Gateway. If you include the optional

seconds

argument, your Neto-

pia Gateway will restart when the speciﬁed number of seconds have elapsed. You must

enter the complete restart command to initiate a restart.