User guide

213
Status Indicator Lights
LED Function Summary Matrix
If a status indicator light does not look correct, look for these possible problems:
Unlit Solid Green
Flashing
Green
Solid Red
Power
No power Power on N/A System failure
USB Active
No signal USB port con-
nected to PC
Activity on the
USB cable
N/A
DSL Sync
No signal DSL line synched
with the DSLAM
Attempting to
train with DSLAM
N/A
DSL Traffic
No signal N/A Activity on the
DSL cable
N/A
Ethernet
Traffic
No signal N/A Activity on the
Ethernet cable
N/A
Ethernet Link
No signal Synched with Ether-
net card
N/A N/A
Internet
No signal Broadband device
is connected.
Activity on the
WAN port.
Physical link estab-
lished, but PPP or
DHCP fails.
Wireless
No signal Wireless is
enabled.
Activity on the
WLAN.
N/A
LED State Possible problems
Power Unlit
1. Make sure the power switch is in the ON position.
2. Make sure the power adapter is plugged into the 2200- and 3300-series
DSL Gateway properly.
3. Try a known good wall outlet.
4. Replace the power supply and/or unit.