User guide

183
Associating a Filter Set with an Interface
Modifying filters
To modify a filter, select a filter from the table and click the Edit button. The Rule Entry
page appears. The parameters in this page are set in the same way as the ones in the orig-
inal Rule Entry page (see “Adding filters to a filter set” on page 178).
Deleting filters
To delete a filter, select a filter from the table and click the Delete button.
Moving filters
To reorganize the filters in a filter set, select a filter from the table and click the Move Up
or Move Down button to place the filter in the desired priority position.
Deleting a filter set
If you delete a filter set, all of the filters it contains are deleted as well. To reuse any of
these filters in another set, before deleting the current filter set you’ll have to note their
configuration and then recreate them.
To delete a filter set, select the filter set from the Filter Sets list and click the Delete but-
ton.
Associating a Filter Set with an Interface
Once you have created a filter set, you must associate it with an interface in order for it to
be effective. Depending on its application, you can associate it with either the WAN (usu-
ally the Internet) inter face or the LAN.
To associate an filter set with the LAN, return to the Filter Sets page.