User guide

147
Security
3. Be sure that you have SafeHarbour VPN enabled.
SafeHarbour is a keyed feature. See “Install Key” on page 197. for information concern-
ing installing Netopia Software Feature Keys.
4. Check the Enable SafeHarbour IPSec checkbox.
Checking this box will automatically display the SafeHarbour IPSec Tunnel Entry
parameters.
Enter the initial group of tunnel parameters. Refer to your Setup Worksheet and the
“Parameter Descriptions” on page 149 as required.
5. Enter the tunnel Name .
This is the only parameter that does not have to match the peer/remote VPN device.
6. Enter the Peer External IP Address .
7. Select the Encryption Protocol from the pull-down menu.
8. Select the Authentication Protocol from the pull-down menu.
9. Click Add .
The Tunnel Details page appears.