User guide

24 PageWriter 2000X User’s Guide
To change the message text size:
1. Select from the menu wheel.
2. Press up or down to highlight Message Text,
then press or to toggle between:
[Now NORMAL] ↵ Displays message text in the standard font
size.
[Now LARGE] ↵ Displays message text in a larger font size.
3. Press to access the button field, then select to
accept the changes and return to the menu wheel.
To turn on/off the audible keyboard click:
1. Select from the menu wheel.
2. Press up or down to highlight Key Clicks, then press
to toggle between [Now ON] and [Now OFF].
3. Press to access the button field, then select to
accept the changes and return to the menu wheel.
Setting the Date and Time
Although your new PageWriter 2000X Two-Way Wireless Commu-
nications Center comes pre-configured, you might need to set the
correct date and time when you first receive your pager. Through
the Set Time application, you can also reset the date and time to
reflect your movement between time zones and for seasonal chang-
es, such as Daylight Savings Time.
To set the date/time:
1. Select from the menu wheel.
TIP When moving to another zone, reset your pager back to Full
Service Send/Receive mode until you receive your first page,
then you can put the pager back into Receive Only mode.
This allows you to tell the service provider where to find
your pager. Zones are defined by the paging service provider,
but in general, a major metropolitan area counts as a zone
(e.g., the greater Chicago area is one zone).
PWContents.book Page 24 Thursday, July 8, 1999 11:57 AM