user manual

85
Power Select
(4)
No No Yes Ye s
2W (1W Model
dependant)
Use CPS to program a SBx button to be used for
selecting the transmission power level you want for
each channel.
Note: There may be power restrictions depending
on the frequency chosen in each channel.
Power Up Text No N/A Yes N/A MOTOROLA
Text that shows up in the radio display when you
turn ON the radio. Default text is MOTOROLA.
Programmable via CPS.
Reset to
Factory
Defaults (2)
Yes Yes Yes Ye s Enabled
Allows to restore radio's factory defaults. Press PTT,
SB1, SB2 simultaneously for 3 seconds while
turning ON radio.
Reverse Burst No No Yes Ye s 180
Reverse Burst eliminates unwanted noise (squelch
tail) during loss of carrier detection. Use CPS to
select values 180 or 240.
Features
Programmable Via
Advanced
Configuration
Programmable via
CPS
Default Value Programming Tips
Display
Non-
Display
Display
Non-
Display