User manual

Global Configuration Commands 5-47
5.1.23 logging
 Global Configuration Commands
Use this command to modify message logging facilities.
Syntax
logging [aggregation-time|buffered|console|facility|host|monitor|on|snmp-set|syslog]
logging aggregation-time <1-60>
logging [buffered|console|monitor|syslog] {<0-7>|alerts|critical|debugging|
emergencies|errors|informational|notifications|warnings}
logging facility [local0|local1|local2|local3|local4|local5|local6|local7]
logging host <A.B.C.D>
logging on
logging snmp-set enable
Parameters
aggregation-time <1-60> Sets number of seconds (between 1 - 60) for aggregating repeated messages
buffered Sets the buffered logging level
• <0-7> – Logging severity level
• alerts – Immediate action needed, (severity=1)
• critical – Critical conditions, (severity=2)
• debugging – Debugging messages, (severity=7)
• emergencies – System is unusable, (severity=0)
• errors – Error conditions, (severity=3)
• informational – Informational messages, (severity=6)
• notifications – Normal but significant conditions, (severity=5)
• warnings – Warning conditions, (severity=4)
console Sets the console logging level
• <0-7> – Logging severity level
• alerts – Immediate action needed, (severity=1)
• critical – Critical conditions, (severity=2)
• debugging – Debugging messages, (severity=7)
• emergencies – System is unusable, (severity=0)
• errors – Error conditions, (severity=3)
• informational – Informational messages, (severity=6)
• notifications – Normal but significant conditions, (severity=5)
• warnings – Warning conditions, (severity=4)