Use and Care Manual

English

Note: Weather channel broadcasts is available in

US and Canada only.

Selecting the Channel

Your radio has 22 channels. The channel is the

frequency the radio uses to transmit. (See the

“Channels and Frequencies” table on overleaf for

details).

1. With the radio on, press Menu/Lock button until the

channel number starts to flash. When the radio is on a

0.5 W channel, display shows . When the radio is on

a 2 W channel, display shows . The current channel

flashes.

2. Press or to change the channel. Long press on

these keys allows you to scroll through the channels

rapidly.

3. Press the PTT button to save the channel setting and exit

Menu or Menu/Lock button to continue set up.

Selecting the Interference Eliminator

Code

Interference Eliminator Codes help minimize

interference by blocking transmissions from

unknown sources. Your radio has 121 Interference

Eliminator Codes. Codes 1–38 are standard analog

codes that appear on other FRS radios. Codes 39–

121 are additional digital codes added for superior

interference protection. 0 is the off position, no

analog or digital codes are enabled.

To set the code for a channel:

1. Press Menu/Lock button until the code starts to

flash.

2. Press or to select the code. Long press on these

keys allows you to scroll through the codes rapidly.

3. Press the PTT button to save the code setting and exit

Menu or Menu/Lock button to continue set up.

Two Way Mode

Weather Mode

Menu Button

Weather Channel (1-11)

Menu Button

Weather Alert (On/Off)

Menu Button

Mode Button