Brukerveiledning

7
English
d. Tighten the inner nuts against the pole mount bracket and
torque to 300 in/lb.
2. If using the band clamps for installation, perform the following
actions:
a. Slide the band clamps through the slots on the pole mount
bracket and attach the bracket to the pole. See Figure 6.
b. Attach the wall mount bracket to the pole mount bracket, with
the receiving slots facing upwards, using two ½ in. bolts and
two ½ in. nuts. Torque to 300 in/lb. See Figure 7.
3. If using a power supply, see the SLR 1000 Basic Service Manual
for detailed instructions.
Figure 4: U-Bolt and Pole Mount Bracket Assembly
Figure 5: U-Bolt and Pole Mount Bracket Assembly
Figure 6: Band Clamps and Pole Mount Bracket
Applicant: Motorola Solutions
Equipment Type: ABZ99FT3096B / 109AB-99FT3096B
Exhibit D2 9 of 14