Brukerveiledning

5
English
Environmental Conditions at Intended Installation
Site
The SLR 1000 Repeater is a rugged, compact repeater suited for
indoor and outdoor locations where moisture and dust may be
common. The repeater may be installed in any suitable location
meeting the restricted access criteria and not exceeding the
equipment specifications for temperature and environmental
exposure (ingress).
Operating Temperature Range
-30 °C (-22 °F) to +60 °C (+140 °F).
Ingress or Environmental Exposure or Resistance
Ingress Rating: IP65, dust and spraying water, and NEMA 4.
The Motorola Quality Standards Fixed Network Equipment
Installation manual, R56; specifically refer to the information on
ground connection for lightning protection and power requirements.
Mechanical Installation
The repeater may be mounted on a wall or pole with the fins oriented
vertically. Alternately, the SLR 1000 Repeater can be ceiling mounted
with the fins facing towards the ceiling.
Mounting the SLR 1000 Repeater to a Wall or Ceiling
When mounting the SLR 1000 Repeater on wall or ceiling, use the
mounting hardware included with the repeater. Obtain four #10/32 lag
bolts, which are not included in the mounting hardware.
Procedure:
1. Attached the bracket to either the wall or ceiling using the four
#10/32 lag bolts. See Figure 1.



Figure 1: Bracket Mounting Holes
Applicant: Motorola Solutions
Equipment Type: ABZ99FT3096B / 109AB-99FT3096B
Exhibit D2 7 of 14