RM SERIES BUILT TOUGH TO DO BUSINESS BETTER QUICK REFERENCE GUIDE FOR RADIO FEATURES MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All rights reserved. Specifications are subject to change without notice. All specifications shown are typical.
RM Series Select your model by clicking over the image RMU2040 RMU2043 RMU2080 RMU2080d RMU2050 RMV2080
RMU2040 QUICK REFERENCE GUIDE 1. DEFAULT VALUES 2. MODEL FEATURES 3. FACTORY DEFAULT 4. DISABLE TONES 5. IVOX 6. VOX RMU2040 7. CHANNEL ANNOUNCEMENT 8. POWER UP AUDIO 9.
RMU2040 DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: On 2 On Power Up Audio: Battery level + Channel PTT (Push-to-Talk) Button CHAN FREQ CODE 1 2 - 464.5500 1 – 67.0 Hz 2 8 - 467.9250 1 – 67.0 Hz 3* 5 - 467.8500 1 – 67.0 Hz 4* 6 - 467.8750 1 – 67.
RM SERIES NON-DISPLAY RADIO FEATURES Antenna On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill Lithium Ion Battery Applies to RMU2040 / RMU2043 / RMM2050 SB1 – Monitor Button SB2 – Channel Select
RM SERIES Factory Settings Reset To reset radio to Factory default settings, Power up with SB1, SB2 & PTT pressed at the same time. On/Off Volume Knob Please note that all channels will revert to default frequencies.
RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed .
RM SERIES External VOX hands free To enable voice activated (VOX) accessories, 3) On/Off Volume Knob 1. Use the Customer Programming Software (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3.
RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES Power up Audio Announcement To cycle through the Power up Audio Announcement options power the radio while pressing SB1 + SB2 at the same time. On/Off Volume Knob OPTIONS: 1. Battery level + Channel # 2. Channel # 3.
RM SERIES Advanced Configuration To enter the Advanced Configuration menu, power up pressing PTT + SB1 button On/Off Volume Knob PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES Advanced Configuration Frequency Active Channel 1) The radio provides voice feedback of the mode entered CH 1 Code Auto Scan PTT (Push-to-Talk) Button “Programming Mode, Channel 1” Applies to RMU2040 / RMU2043 / RMM2050 2) Press PTT to cycle through the Advanced Configuration Menu options
RM SERIES Advanced Configuration Frequency Active Channel Select from the list of pre-programmed frequencies “Frequency x, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Code Menu 2) Select from the list of pre-programmed codes “Code x, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Auto Scan menu 2) Enable / disable by pressing SB1 or SB2 “Auto Scan Disabled, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Active Channel menu 2) Add / remove channels by pressing SB1 or SB2 “Active Channels 2, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through the Advanced Configuration Menu until you hear the channel number Frequency Active Channel CH 2 Code Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 “Channel 1” Applies to RMU2040 / RMU2043 / RMM2050 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the Advanced Configuration Menu options for Channel 2
RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio.
RM SERIES BUILT TOUGH TO DO BUSINESS BETTER
RMU2043 QUICK REFERENCE GUIDE 1. DEFAULT VALUES 2. MODEL FEATURES 3. FACTORY DEFAULT 4. DISABLE TONES 5. IVOX 6. VOX RMU2043 7. CHANNEL ANNOUNCEMENT 8. POWER UP AUDIO 9.
RMU2043 DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: On 2 On Power Up Audio: Battery level + Channel PTT (Push-to-Talk) Button CHAN FREQ CODE 1 1 - 458.6625 1 – 67.0 Hz 2 2 – 469.2625 1 – 67.0 Hz 3* 1 - 458.6625 2 – 71.9 Hz 4* 2 - 469.2625 2 – 71.
RM SERIES NON-DISPLAY RADIO FEATURES Antenna On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill Lithium Ion Battery Applies to RMU2040 / RMU2043 / RMM2050 SB1 – Monitor Button SB2 – Channel Select
RM SERIES Factory Settings Reset To reset radio to Factory default settings, Power up with SB1, SB2 & PTT pressed at the same time. On/Off Volume Knob Please note that all channels will revert to default frequencies.
RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed .
RM SERIES External VOX hands free To enable voice activated (VOX) accessories, 3) On/Off Volume Knob 1. Use the Customer Programming Software (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3.
RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES Power up Audio Announcement To cycle through the Power up Audio Announcement options power the radio while pressing SB1 + SB2 at the same time. On/Off Volume Knob OPTIONS: 1. Battery level + Channel # 2. Channel # 3.
RM SERIES Advanced Configuration To enter the Advanced Configuration menu, power up pressing PTT + SB1 button On/Off Volume Knob PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES Advanced Configuration Frequency Active Channel 1) The radio provides voice feedback of the mode entered CH 1 Code Auto Scan PTT (Push-to-Talk) Button “Programming Mode, Channel 1” Applies to RMU2040 / RMU2043 / RMM2050 2) Press PTT to cycle through the Advanced Configuration Menu options
RM SERIES Advanced Configuration Frequency Active Channel Select from the list of pre-programmed frequencies “Frequency x, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Code Menu 2) Select from the list of pre-programmed codes “Code x, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Auto Scan menu 2) Enable / disable by pressing SB1 or SB2 “Auto Scan Disabled, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Active Channel menu 2) Add / remove channels by pressing SB1 or SB2 “Active Channels 2, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through the Advanced Configuration Menu until you hear the channel number Frequency Active Channel CH 2 Code Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 “Channel 1” Applies to RMU2040 / RMU2043 / RMM2050 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the Advanced Configuration Menu options for Channel 2
RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio.
RM SERIES BUILT TOUGH TO DO BUSINESS BETTER
RMU2050 QUICK REFERENCE GUIDE 1. DEFAULT VALUES 2. MODEL FEATURES 3. FACTORY DEFAULT 4. DISABLE TONES 5. IVOX 6. VOX RMU2050 7. CHANNEL ANNOUNCEMENT 8. POWER UP AUDIO 9.
RMM2050 DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: On 5 On Power Up Audio: Battery level + Channel PTT (Push-to-Talk) Button CHAN FREQ CODE 1 154.7000 1 – 67.0 Hz 2 154.6000 1 – 67.0 Hz 3 151.8200 1 – 67.0 Hz 4 151.8800 1 – 67.0 Hz 5 151.9400 1 – 67.
RM SERIES NON-DISPLAY RADIO FEATURES Antenna On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill Lithium Ion Battery Applies to RMU2040 / RMU2043 / RMM2050 SB1 – Monitor Button SB2 – Channel Select
RM SERIES Factory Settings Reset To reset radio to Factory default settings, Power up with SB1, SB2 & PTT pressed at the same time. On/Off Volume Knob Please note that all channels will revert to default frequencies.
RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed .
RM SERIES External VOX hands free To enable voice activated (VOX) accessories, 3) On/Off Volume Knob 1. Use the Customer Programming Software (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3.
RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES Power up Audio Announcement To cycle through the Power up Audio Announcement options power the radio while pressing SB1 + SB2 at the same time. On/Off Volume Knob OPTIONS: 1. Battery level + Channel # 2. Channel # 3.
RM SERIES Advanced Configuration To enter the Advanced Configuration menu, power up pressing PTT + SB1 button On/Off Volume Knob PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2040 / RMU2043 / RMM2050
RM SERIES Advanced Configuration Frequency Active Channel 1) The radio provides voice feedback of the mode entered CH 1 Code Auto Scan PTT (Push-to-Talk) Button “Programming Mode, Channel 1” Applies to RMU2040 / RMU2043 / RMM2050 2) Press PTT to cycle through the Advanced Configuration Menu options
RM SERIES Advanced Configuration Frequency Active Channel Select from the list of pre-programmed frequencies “Frequency x, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Code Menu 2) Select from the list of pre-programmed codes “Code x, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Auto Scan menu 2) Enable / disable by pressing SB1 or SB2 “Auto Scan Disabled, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Active Channel menu 2) Add / remove channels by pressing SB1 or SB2 “Active Channels 2, To change press side button 1 or 2” Applies to RMU2040 / RMU2043 / RMM2050 Frequency Active Channel CH 1 Auto Scan SB1 – Monitor Button SB2 – Channel Select Code
RM SERIES Advanced Configuration 1) Press PTT to cycle through the Advanced Configuration Menu until you hear the channel number Frequency Active Channel CH 2 Code Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 “Channel 1” Applies to RMU2040 / RMU2043 / RMM2050 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the Advanced Configuration Menu options for Channel 2
RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio.
RM SERIES BUILT TOUGH TO DO BUSINESS BETTER
RMU2080 QUICK REFERENCE GUIDE 1. DEFAULT VALUES 2. MODEL FEATURES 3. FACTORY DEFAULT 4. DISABLE TONES 5. IVOX 6. VOX RMU2080 7. CHANNEL ANNOUNCEMENT 8. POWER UP AUDIO 9.
RMU2080 DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: Weather Channel: Power Up Audio: Battery level + Channel Channel Selector PTT (Push-to-Talk) Button SB1 – Monitor Button SB2 – Scan/Nuisance Ch Delete On 7 On On CHAN FREQ CODE 1 2 – 464.5500 1 – 67.0 Hz 2 8 – 467.9250 1 – 67.0 Hz 3 5 – 467.8500 1 – 67.0 Hz 4 6 – 467.8750 1 – 67.0 Hz 5 10 – 461.0625 1 – 67.0 Hz 6 12 – 461.1125 1 – 67.0 Hz 7 14 – 461.1625 1 – 67.0 Hz 8* 16 – 461.2125 1 – 67.
RM SERIES NON-DISPLAY RADIO FEATURES Antenna Channel Selector On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill Lithium Ion Battery Applies to RMU2080 / RMV2080 SB1 – Monitor Button SB2 – Channel Select
RM SERIES Factory Settings Reset To reset radio to Factory default settings, Power up with SB1, SB2 & PTT pressed at the same time. On/Off Volume Knob Please note that all channels will revert to default frequencies.
RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2080 / RMV2080
RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed .
RM SERIES External VOX hands free To enable voice activated (VOX) accessories, 3) On/Off Volume Knob 1. Use the Customer Programming Software (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3.
RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2080 / RMV2080
RM SERIES Power up Audio Announcement To cycle through the Power up Audio Announcement options power the radio while pressing SB1 + SB2 at the same time. On/Off Volume Knob OPTIONS: 1. Battery level + Channel # 2. Channel # 3.
RM SERIES Advanced Configuration To enter the Advanced Configuration menu, power up pressing PTT + SB1 button On/Off Volume Knob PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2080 / RMV2080
RM SERIES Advanced Configuration Frequency Weather 1) The radio provides voice feedback of the mode entered Code CH 1 Active Channel Auto Scan PTT (Push-to-Talk) Button “Programming Mode, Channel 1” Applies to RMU2080 / RMV2080 2) Press PTT to cycle through the Advanced Configuration Menu options
RM SERIES Advanced Configuration Frequency Weather Code CH 1 Select from the list of pre-programmed frequencies “Frequency x, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Code Menu 2) Select from the list of pre-programmed codes “Code x, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Frequency Weather Code CH 1 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Auto Scan menu 2) Enable / disable by pressing SB1 or SB2 “Auto Scan Disabled, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Frequency Weather Code CH 1 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Active Channel menu 2) Add / remove channels by pressing SB1 or SB2 “Active Channels 2, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Frequency Weather Code CH 1 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Active Channel menu 2) Enable / disable by pressing SB1 or SB2 “Weather Enabled, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Frequency Weather Code CH 1 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through the Advanced Configuration Menu until you hear the channel number Frequency Active Channel CH 2 Code Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 “Channel 1” Applies to RMU2080 / RMV2080 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the Advanced Configuration Menu options for Channel 2
RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio.
RM SERIES BUILT TOUGH TO DO BUSINESS BETTER
RMV2080 QUICK REFERENCE GUIDE 1. DEFAULT VALUES 2. MODEL FEATURES 3. FACTORY DEFAULT 4. DISABLE TONES 5. IVOX 6. VOX RMV2080 7. CHANNEL ANNOUNCEMENT 8. POWER UP AUDIO 9.
RMV2080 DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: Weather Channel: On 7 On On CHAN FREQ CODE 1 20 – 154.4900 1 – 67.0 Hz 2 21 – 154.5150 1 – 67.0 Hz 3 1 – 151.6250 1 – 67.0 Hz 4 2 – 151.9550 1 – 67.0 Hz PTT (Push-to-Talk) Button 5 10 – 151.5125 1 – 67.0 Hz SB1 – Monitor Button 6 12 – 151.6850 1 – 67.0 Hz SB2 – Scan/Nuisance Ch Delete 7 15 – 151.7750 1 – 67.0 Hz 8* 26 – 158.4000 1 – 67.
RM SERIES NON-DISPLAY RADIO FEATURES Antenna Channel Selector On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill Lithium Ion Battery Applies to RMU2080 / RMV2080 SB1 – Monitor Button SB2 – Channel Select
RM SERIES Factory Settings Reset To reset radio to Factory default settings, Power up with SB1, SB2 & PTT pressed at the same time. On/Off Volume Knob Please note that all channels will revert to default frequencies.
RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select Applies to RMU2080 / RMV2080
RM SERIES IVOX hands free On/Off Volume Knob To enable the IVOX Power up with PTT pressed .
RM SERIES External VOX hands free To enable voice activated (VOX) accessories, 3) On/Off Volume Knob 1. Use the Customer Programming Software (CPS) to change the Vox Level of the radio 2. Attach a VOX supported accessory 3.
RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button Applies to RMU2080 / RMV2080
RM SERIES Power up Audio Announcement To cycle through the Power up Audio Announcement options power the radio while pressing SB1 + SB2 at the same time. On/Off Volume Knob OPTIONS: 1. Battery level + Channel # 2. Channel # 3.
RM SERIES Advanced Configuration To enter the Advanced Configuration menu, power up pressing PTT + SB1 button On/Off Volume Knob PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2080 / RMV2080
RM SERIES Advanced Configuration Frequency Weather 1) The radio provides voice feedback of the mode entered Code CH 1 Active Channel Auto Scan PTT (Push-to-Talk) Button “Programming Mode, Channel 1” Applies to RMU2080 / RMV2080 2) Press PTT to cycle through the Advanced Configuration Menu options
RM SERIES Advanced Configuration Frequency Weather Code CH 1 Select from the list of pre-programmed frequencies “Frequency x, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Code Menu 2) Select from the list of pre-programmed codes “Code x, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Frequency Weather Code CH 1 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Auto Scan menu 2) Enable / disable by pressing SB1 or SB2 “Auto Scan Disabled, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Frequency Weather Code CH 1 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Active Channel menu 2) Add / remove channels by pressing SB1 or SB2 “Active Channels 2, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Frequency Weather Code CH 1 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Active Channel menu 2) Enable / disable by pressing SB1 or SB2 “Weather Enabled, To change press side button 1 or 2” Applies to RMU2080 / RMV2080 Frequency Weather Code CH 1 Active Channel Auto Scan SB1 – Monitor Button SB2 – Channel Select
RM SERIES Advanced Configuration 1) Press PTT to cycle through the Advanced Configuration Menu until you hear the channel number Frequency Active Channel CH 2 Code Auto Scan 2) Select another channel to configure by pressing SB1 or SB2 “Channel 1” Applies to RMU2080 / RMV2080 PTT (Push-to-Talk) Button 3) Press PTT to cycle through the Advanced Configuration Menu options for Channel 2
RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio.
RM SERIES BUILT TOUGH TO DO BUSINESS BETTER
RMU2080d QUICK REFERENCE GUIDE 1. DEFAULT VALUES 2. MODEL FEATURES 3. FACTORY DEFAULT 4. DISABLE TONES 5. IVOX 6. VOX RMU2080d 7. CHANNEL ANNOUNCEMENT 8. POWER UP AUDIO 9.
RMU2080d DEFAULT VALUES Channel Voice Prompt: Active Channels: Battery Save: Weather Channel: On 7 On On CHAN FREQ CODE 1 2 – 464.5500 1 – 67.0 Hz 2 8 – 467.9250 1 – 67.0 Hz 3 5 – 467.8500 1 – 67.0 Hz 4 6 – 467.8750 1 – 67.0 Hz PTT (Push-to-Talk) Button 5 10 – 461.0625 1 – 67.0 Hz SB1 – Monitor Button 6 12 – 461.1125 1 – 67.0 Hz SB2 – Scan/Nuisance Ch Delete 7 14 – 461.1625 1 – 67.0 Hz 8* 16 – 461.2125 1 – 67.
RM SERIES DISPLAY RADIO FEATURES Antenna Channel Selector On/Off Volume Knob LED Indicator Microphone Accessory Connector PTT (Push-to-Talk) Button Rugged Speaker Grill Menu button Use to lock keypad Lithium Ion Battery Front Buttons Use < and > to scroll up/down menu settings Applies to RMU2080d SB1 – Monitor Button SB2 – Channel Select
RM SERIES Factory Settings Reset To reset radio to Factory default settings, Power up with SB1, SB2 & PTT pressed at the same time. Please note that all channels will revert to default frequencies.
RM SERIES Toggle (Disable/Enable) Keypad tones On/Off Volume Knob To disable/enable keypad tones, power up with SB2 button pressed SB2 – Channel Select
RM SERIES IVOX hands free 1. To enable the IVOX Power up with PTT pressed . 2.
RM SERIES External VOX hands free To enable voice activated (VOX) accessories, 1. Attach a VOX supported accessory 2. Power up with VOX accessory attached 3.
RM SERIES Channel Voice Annunciation On/Off Volume Knob To enable/disable the Channel Voice announcement, power up pressing SB1 button SB1 – Monitor Button
RM SERIES Power up Audio Announcement To cycle through the Power up Audio Announcement options power the radio while pressing SB1, SB2 at the same time. OPTIONS: 1. Channel # 2. Battery level + Channel # 3.
RM SERIES Advanced Configuration To enter the Advanced Configuration menu, power up pressing PTT + SB1 button On/Off Volume Knob PTT (Push-to-Talk) Button SB1 – Monitor Button Applies to RMU2080d
RM SERIES Advanced Configuration Freque ncy Weath er Code Auto Scan 1) The display blinks and an icon PROG appears to denote programming mode Scram ble CH 1 ACC Mic Sens Active Chann el Radio Mic Sens Call Tone PTT (Push-to-Talk) Button “Channel X” 2) Press PTT to cycle through the Advanced Configuration Menu options CHAN 01 Applies to RMU2080d
RM SERIES Advanced Configuration Freque ncy Weath er Code Auto Scan Use to select from the list of pre-programmed frequencies 01 RX CHAN PROG 02 Scram ble CH 1 ACC Mic Sens Active Chann el Radio Mic Sens < A – Decrease FREQ B > – Increase Applies to RMU2080d Call Tone
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Code Menu 2) Select from the list of pre-programmed codes 01 RX CHAN PROG 001 Freque ncy Weath er Auto Scan Code CH 1 ACC Mic Sens Active Chann el Radio Mic Sens < A – Decrease CODE B > – Increase Applies to RMU2080d Scram ble Call Tone
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Scramble menu 2) Select 0 to disable or assign a scramble code from 1-4 01 CHAN PROG 0 Freque ncy Weath er Code Auto Scan Scram ble CH 1 ACC Mic Sens Active Chann el Radio Mic Sens < A – Decrease B > – Increase Applies to RMU2080d Call Tone
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Active Channel menu 2) Add / remove channels by pressing MAXCH PROG 08 Freque ncy Weath er Code Auto Scan Scram ble CH 1 ACC Mic Sens Active Chann el Radio Mic Sens < A – Decrease B > – Increase Applies to RMU2080d Call Tone
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Call Tone menu 2) Select 0 to disable or assign a Call tone from 1 - 3 TONE PROG 0 Freque ncy Weath er Code Auto Scan Scram ble CH 1 ACC Mic Sens Active Chann el Radio Mic Sens < A – Decrease B > – Increase Applies to RMU2080d Call Tone
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Radio Internal Microphone sensitivity menu 2) Default value is Medium (2) you can select Low (1) or High (3) by pressing IMIC PROG 2 Freque ncy Weath er Code Auto Scan Scram ble CH 1 ACC Mic Sens Active Chann el Radio Mic Sens < A – Decrease B > – Increase Applies to RMU2080d Call Tone
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Accessory Microphone sensitivity menu 2) Default value is Medium (2) you can select Low (1) or High (3) by pressing MIC PROG 2 Freque ncy Weath er Code Auto Scan Scram ble CH 1 ACC Mic Sens Active Chann el Radio Mic Sens < A – Decrease B > – Increase Applies to RMU2080d Call Tone
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Auto Scan menu 2) Press to enable / disable 01 CHAN PROG YES Freque ncy Weath er Code Auto Scan Scram ble CH 1 ACC Mic Sens Active Chann el Radio Mic Sens < A – Decrease B > – Increase Applies to RMU2080d Call Tone
RM SERIES Advanced Configuration 1) Press PTT to cycle through to the Weather menu.
RM SERIES Advanced Configuration Freque ncy Weath er Code Auto Scan 1) After you finish configuring the current channel you can select another channel to configure by using the Channel selector Scram ble CH 2 Channel Selector ACC Mic Sens Active Chann el Radio Mic Sens Call Tone PTT (Push-to-Talk) Button 2) Press PTT to cycle through the Advanced Configuration Menu options for Channel 2 “Channel 2” Applies to RMU2080d
RM SERIES Advanced Configuration To exit Advanced Configuration you can: 1) Power cycle the radio.
RM SERIES BUILT TOUGH TO DO BUSINESS BETTER
