User's Manual

5
English
5. Wireless devices which connected with the
adapter will be automatically reconnected on the
next power up.
Unpairing Or Replacing With New Wireless
Device
a.Power OFF the Radio
b.Press and hold the PTT button on the adapter
while powering up the radio until the adapter
provides LED indication. This indicates that the
adapter has unpaired with the previously paired
device(s) and is ready to pair with the new
device. Refer to “LED Status Indication” on
page 3.
c.Repeat steps 1 to 5 to pair a new wireless
device.
Note: When this step is performed, it will erase all the
previously paired device information. However, the user can
repeat the “Wireless Adapter Pairing Procedure” on page 4
for pairing with intended device.
Wireless Link Lost
In the event of interference, or if the wireless device is
out of range, the link between the Wireless Adapter
and wireless device may be lost.
If the link between the adapter and wireless audio
device is lost, the radio will generate a link lost tone
and the received audio is automatically routed back to
the radio’s speaker and the radio will generate a Bad
Key Tone whenever the PTT button on the adapter or
the connected wireless PTT device is pressed.