User's Manual

4
English
Wireless Adapter Pairing Procedure
1. Place the wireless device in pairing mode. Refer to
respective wireless device’s user manual.
2. Refer to “Attaching the Wireless Adapter to the
Radio's Universal Connector” on page 1 to attach
the adapter to the radio.
3. Place the blue dot (secure pairing spot) on the
wireless device within one inch of the blue dot
(secure pairing spot) on the adapter.
a.The adapter allows a maximum of one wireless
audio device and one wireless PTT device to
pair with it.
b.If the maximum number of device is reached,
the user needs to unpair the device. Refer to
“Unpairing Or Replacing With New Wireless
Device” on page 5 for unpairing procedure.
Note: If the user wish to replace a new wireless device, the
user needs to erase the existing pairing info. Refer to
“Unpairing Or Replacing With New Wireless Device” on
page 5 for unpairing procedure.
Figure 2 PTT Button and LED on the Wireless
Adapter
4. The adapter provides LED indication when
successfully connected with the wireless device.
The radio will generate a link established Tone on
the radio speaker whenever a Wireless Audio
Device is connected. Refer to “LED Status
Indication” on page 3.
PTT
Button
LED