User's Manual

7
Connecting for the First Time
1. Turn Bluetooth radio on.
Double SCAN tone sounds every two seconds.
Note: To stop scan, press SB3 twice (short presses).
You should press SB3 only briefly before releasing it; do
not hold down SB3.
2. Turn Bluetooth device(s) on.
3. Place Bluetooth device(s) within 3 in. (7 cm.) of the
front of the radio. This must be done within a few
seconds of turning on the radio.
Connection occurs with first Bluetooth device.
CONNECT tone sounds and tracking number
appears on display radio model.
Note: Each Bluetooth device has a unique 10-digit
tracking number (e.g., DA0FBL0000) for device
identification.
If you are not connecting to a second device, short-
press SB3 twice.
If you are connecting to a second device, keep all
devices within 3 in. (7 cm.) of each other until
CONNECT tone sounds again. Tracking number
appears on display radio models.
4. Operate devices.
You can now move devices outside the 3-in. (7-cm.)
connection range once connected.
Note: If connection occurs with only a Bluetooth Push-
To-Talk device, the connection will be dropped because
this device will not operate by itself.