User's Manual

5
INSTALLATION AND PROGRAMMING
With the option board installed, your portable
Professional Series Radio is enabled with Bluetooth
technology. See your local Motorola representative for
installation and programming.
Note to installer:
Refer to the portable Professional Series Radio service
manual for option board installation procedures. In
addition, you must replace the radio’s existing retainer
with a modified version (as indicated below) for proper
Bluetooth antenna operation. The modified retainers
and associated pads are included with the option board.
If your current retainer has pads attached, duplicate the
pad layout of your current retainer on your modified
retainer using the enclosed pads.
A separate identification label is also enclosed. Please
apply this to the back of the radio, under the battery.
If installed in any FM Professional Series
Radio, FM Approval of that radio is negated.
If installed in any mobile Professional
Series Radio, the option board will be
damaged. For portable use only.
Replace Current Retainer With Modified Retainer
42D80498Z01 01D85596E01
42D86266Z01 01D85596E02
!
W A R N I N G
!