User's Manual

10
Channel Change
The option board can be enabled or disabled per
channel. See your local Motorola representative for
programming information.
If the option board is enabled on every channel, there is
no interruption in Bluetooth connection when channel is
changed.
If the option board is disabled on some channels and
you switch to a disabled channel, you will hear a
CHANNEL CHANGED ALERT tone one second after
switching. Bluetooth devices become inoperable,
though still connected. Switch back to enabled channel
within three seconds to prevent dropped connection.
Ending a Connection
If you do not want to operate with Bluetooth device(s),
you need to end the current connection:
• Short-press SB3 twice.
You hear one ALERT tone for each Bluetooth device
disconnected.
Note: You can also turn radio off for a few seconds, then
back on. This disconnects and turns off Bluetooth
device(s).
Connecting to Last Device(s)
You can quickly reconnect to the last device(s) that
linked to your Bluetooth radio.
1. Turn Bluetooth radio on.