User's Manual

9
Removing the Radio Bluetooth Adapter (RBA)
1. Detach the side connector from the acces-
sory connector with the metal screw using a
coin or thin bladed screwdriver.
2. Detach the top latch by pressing down and
pulling the RBA away from the battery.
Turning ON the RBA
The RBA turns ON when the radio is turned ON.
The RBA LED lights GREEN for one second,
indicating successful power-up. When you first
turn on your RBA, it will first attempt to establish
a connection with the last Bluetooth audio acces-
sory it was connected to, otherwise it will attempt
to connect to a new accessory.
Establishing the Bluetooth Wireless Connection
Following these simple steps establishes a new
connection when your RBA and audio accessory
are first turned on:
1. Turn ON your radio. The RBA turns on when
the radio is turned on.
• The RBA LED lights GREEN for one sec-
ond, indicating successful power-up.
2. Turn ON the Bluetooth wireless capable
audio accessory. (Refer to your accessory
manual.)