User's Guide

Talk/Mute slide button
For information about the icons on the display, see page 27. For information on the status LEDs,
see page 24.
Talk/Mute slide button
The Talk/Mute slide button is on the front of the transmitter. After turning on the transmitter and
synchronizing it with the base, you can use the Talk/Mute button to trigger a recording event or to
mute audio being transmitted to the DVR.
Triggering the DVR to begin a recorded event
If the DVR is not recording, slide the Talk/Mute button down and release it to trigger the DVR to
begin a recorded event.
Note: If a recorded event is triggered on the DVR by something other than the HiFi
Mic, the transmitter audio automatically begins transmitting to the DVR.
The transmitter indicates that it is transmitting audio using an icon on the display (Record icon)
and the status LEDs (green LED is on).
For information on the icons on the display, see page 27. For information on the status LEDs, see
page 24.
Important! You cannot stop a recorded event using the HiFi Mic, even when a
recorded event is triggered from the HiFi Mic. You can only stop a recording event
using the DVR display.
Muting audio being transmitted to the DVR
When the DVR is recording, you can slide down and hold the Talk/Mute button to mute any audio
being transmitted to the DVR.
Important! No audio is recorded while you hold down the Talk/Mute button.
The transmitter indicates that audio is muted using an icon on the display (Mute icon) and the
status LEDs (green LED flashes).
HiFi Microphone
HiFi Microphone User Guide
WGD00181, Revision A
21