User's Manual
Table Of Contents
- Foreword
- Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards
- Declaration of Conformity
- Table of Contents
- List of Figures
- Related Publications
- Repeater Model Numbering Scheme
- Commercial Warranty
- Chapter 1 Pre-Installation Considerations
- Chapter 2 Mechanical Installation
- Chapter 3 Indicators and Connectors
- Chapter 4 Electrical Connections
- Chapter 5 Post-Installation Checklist
- Chapter 6 Accessories
- Appendix A Replacement Parts Ordering
- Appendix B Motorola Service Centers
December 2009 6816814H01
3-2 Indicators and Connectors Rear Panel
3.2 Rear Panel
3.2.1 Rear Panel Part
No Item Description
Rx Connector BNC (Female).
Power Supply On/Off
Switch
Turns on or off the power to the repeater from AC input.
Battery Backup Connector
(DC Input)
Backup battery supplies backup power to the repeater. The
battery is an optional accessory. The repeater will trickle
charge battery, but an external charger is recommended to
equalize battery after a prolonged use. Auto switching from
AC to battery with loss of AC power is a function of the
standard repeater power supply. Supply will automatically
switch back to AC operation upon the return of AC power.
The front panel power LED switches from green to red when
on battery power.
Power Supply Fan Runs continuously to cool the repeater.
Main Power Supply
Connector (AC Input)
100 – 240 Volts.
Rear Accessory
Connector
Programming cable plugs in here.
Ethernet Connector 10-Base-T/100-Base-Tx (RJ45)
Main Fan
Variable speed. Speeds up with extended use of the
repeater.
Tx Connector Type-N (Female).
Ground Screw Must be connected to System Ground.
1
3
2
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10