User's Manual
Table Of Contents
- Declaration of Conformity
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Making and Receiving Calls
- Advanced Features
- Scan Lists
- Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Dual-Tone Multi Frequency (DTMF)
- Trunking System Controls
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Setting the Squelch Level
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Turning the Talk Permit Tone On or Off
- Turning the LED Indicator On or Off
- Turning the Introduction Screen On or Off
- Accessing General Radio Information
- Batteries and Chargers Warranty
- Limited Warranty
Advanced Features
English
47
Accessing General Radio Information
Your radio contains information on the following:
• Battery
• Radio ID
• Software Version
• Codeplug Version
NOTE: Press
R at any time to return to the previous screen
or long press
R to return to the Home screen.
Accessing the Battery Information
Displays information on your radio battery.
Procedure:
1 S to access the menu.
2 Por Q to Utilities and press N to select.
3 Por Q to Radio Info and press N to select.
4 Por Q to Battery Info and press N to select.
5 The display shows the battery information.
OR
For IMPRES batteries ONLY: The display reads
Recondition Battery if the battery requires
reconditioning in an IMPRES charger.
After the reconditioning process, the display then shows the
battery information.
For IMPRES batteries ONLY:
Press Por Q to access the Remaining Capacity, First
Used, or Service Life option screen:
• Select Remaining Capacity to view battery capacity level,
indicated by a horizontal bar and percentage reading.
• Select First Used to view the date when battery is first
used.
• Select Service Life to view the potential and current
capacity of the battery.