User's Manual
Table Of Contents
- Declaration of Conformity
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Making and Receiving Calls
- Advanced Features
- Scan Lists
- Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Dual-Tone Multi Frequency (DTMF)
- Trunking System Controls
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Setting the Squelch Level
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Turning the Talk Permit Tone On or Off
- Turning the LED Indicator On or Off
- Turning the Introduction Screen On or Off
- Accessing General Radio Information
- Batteries and Chargers Warranty
- Limited Warranty
Advanced Features
English
35
Receiving an Emergency Call
Procedure:
1 When receiving an Emergency Call, the first line of the
display shows the alias or ID of the caller. The second line
displays Emergency.
2 The LED blinks red and you hear a voice from the
Emergency Call initiating radio.
3 If the voice channel is lost, the Emergency Call ends.
Receiving an Emergency Alarm
Procedure:
1 When receiving an Emergency Alarm, the first line of the
display shows the alias or ID of the sender. The second line
displays Alarm Rcvd.
2 A tone sounds and the LED blinks red.
3 Press R to clear the alarm indication.
OR
If no button is pressed, the alarm indication exits
automatically after a short duration.
When your radio receives an Emergency Alarm, it displays the
Emergency Alarm received indications for approximately, 10
seconds.
Receiving an Emergency Alarm with Call
Procedure:
1 When receiving an Emergency Alarm with Call, the first line
of the display shows the alias or ID of the sender. The
second line displays Alarm Rcvd.
2 A tone sounds and the LED blinks red.
3 Press R to clear the alarm indication.
OR
If no button is pressed, the alarm indication exits
automatically after a short duration.
4 You hear a voice from the Emergency Alarm with Call
initiating radio.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
6 Press PTT button to initiate a call with the emergency
initiating radio. The LED lights up solid green.
7 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
8 Release the PTT button to listen. When the emergency
initiating radio responds, the LED blinks green.