User's Manual
Table Of Contents
- Declaration of Conformity
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Making and Receiving Calls
- Advanced Features
- Scan Lists
- Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Dual-Tone Multi Frequency (DTMF)
- Trunking System Controls
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Setting the Squelch Level
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Turning the Talk Permit Tone On or Off
- Turning the LED Indicator On or Off
- Turning the Introduction Screen On or Off
- Accessing General Radio Information
- Batteries and Chargers Warranty
- Limited Warranty
Identifying Radio Controls
English
7
Programmable Buttons
Your dealer or system administrator can program the
programmable buttons as shortcuts to radio functions or preset
channels/groups depending on the duration of a button press:
• Press – Pressing and releasing rapidly.
• Long press – Pressing and holding for the programmed
duration (between 0.25 seconds and 3.75 seconds).
• Hold down – Keeping the button pressed.
Assignable Radio Functions
Battery Indicator – Checks the battery charge status via the
LED.
Call* – Initiates a private call by keying in or selecting any
subscriber ID and accepts incoming private calls.
Call Alert* – Allows selection of radio ID number to initiate a call
alert.
Contacts – Provides direct access to the Contacts list.
Emergency* – Depending on the programming, initiates or
cancels an emergency alarm or call.
Message Update* – Selects a message update to send to the
dispatcher.
Monitor** – Monitors a selected channel for activity.
Nuisance Delete – Temporarily removes an unwanted channel
from the scan list until the radio is powered off and on again, or
the scan is turned off and on again.
One Touch Call* – Directly initiates a predefined Message,
Status, Private Call, Phone Call, or a Call Alert to a target radio.
Permanent Monitor** – Monitors a selected channel for all
radio traffic until function is turned off.
Phone – Initiates a phone call by keying in or selecting any
phone ID and accepts incoming phone calls.
Repeater/Talkaround** – Toggles between using a repeater
and communicating directly with another radio.
Scan – Toggles scan on or off.
Site Display* – Displays current site on the radio display.
Site Lock On/Off* – Toggles the automatic site roam on or off
in Smart Zone operation.
Site Search* – Starts site search in SmartZone operation.
Status Update* – Selects a status update to send to the
dispatcher.
Transmit Inhibit – Prevents transmission when enabled.
Zone –
Allows selection from a list of zones.
* A trunking only feature
** A conventional only feature