User's Manual

Advanced Features
English
43
Turning Keypad Tones On or Off
You can enable and disable keypad tones if needed.
Procedure:
1 S to access the menu.
2 Por Q to Utilities and press N to select.
3 Por Q to Radio Settings and press N to select.
4 Por Q to Tones/Alerts and press N to select.
5 Por Q to Keypad Tones and press N to select.
6 The display shows Turn On. Press N to enable keypad
tones. The display shows Keypad Tone On.
OR
The display shows Turn Off. Press
N to disable keypad
tones. The display shows Keypad Tone Off.
Setting the Squelch Level
NOTE: This is a conventional only feature.
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
Procedure:
Press the programmed Squelch button to toggle squelch level
between normal and tight.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Utilities and press N to select.
3 Por Q to Radio Settings and press N to select.
4 Por Q to Squelch and press N to select.
5 Choose either Tight or Normal and press N to select.
6 Screen returns to the previous menu.

NAG_LACR.book Page 43 Monday, August 23, 2010 1:03 PM