User's Manual
Table Of Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Making and Receiving Calls
- Advanced Features
- Scan Lists
- Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Dual-Tone Multi Frequency (DTMF)
- Trunking System Controls
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Setting the Squelch Level
- Setting the Power Level
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Turning the Talk Permit Tone On or Off
- Turning the LED Indicator On or Off
- Turning the Introduction Screen On or Off
- Accessing General Radio Information
- Accessories
- Batteries and Chargers Warranty
- Limited Warranty
Advanced Features
English
42
Changing the Current Site
Procedure:
1 Press the preprogrammed Site Search button (it could be
short press or long press based on the configuration of the
programmable button).
2 A tone sounds and the display momentarily shows Scanning
site.
3 When the radio finds a new site, it returns to the Home
screen.
Utilities
Locking and Unlocking the Keypad
You can lock your radio’s keypad to avoid inadvertent key entry.
Procedure:
1 S to access the menu.
2 Por Q to Utilities and press N to select.
3 Por Q to Radio Settings and press N to select.
4 Por Q to Keypad Lock and press N to select.
5 The display shows Keypad Locked and returns to the Home
screen.
6 To unlock the keypad, press S followed by *.
7 The display shows Keypad Unlocked and returns to the
Home screen.
NAG_LACR.book Page 42 Monday, August 23, 2010 1:03 PM