User's Manual

Advanced Features

English

Turning the Introduction Screen On or Off

You can enable and disable the Introduction Screen if needed.

Procedure:

1 S to access the menu.

2 Por Q to Utilities and press N to select.

3 Por Q to Radio Settings and press N to select.

4 Por Q to Intro Screen and press N to select.

5 The display shows Turn On. Press N to enable the

Introduction Screen. The display shows Intro Screen On.

The display shows Turn Off. Press

N to disable the

Introduction Screen. The display shows Intro Screen

Off.

Accessing General Radio Information

Your radio contains information on the following:

• Radio ID

• Software Version

• Codeplug Version

NOTE: Press

R at any time to return to the previous screen

or long press

R to return to the Home screen.

Checking the Radio ID

NOTE: This is a trunking only feature.

Displays the ID of your radio.

Procedure:

1 S to access the menu.

2 Por Q to Utilities and press N to select.

3 Por Q to Radio Info and press N to select.

4 Por Q to My Number and press N to select.

5 The display shows the radio ID.

Checking the Firmware Version

Displays the firmware version on your radio.

Procedure:

1 S to access the menu.

2 Por Q to Utilities and press N to select.

3 Por Q to Radio Info and press N to select.

4 Por Q to Firmware Ver. and press N to select.

5 The display shows the current firmware version.

