User's Manual

Advanced Features
English
29
5 Press and hold the programmed Emergency button for
about a second to exit the Emergency Call mode.
If your radio is set to Silent, it will not have any audio or visual indicators related to the Emergency feature.
Sending an Emergency Alarm
This feature allows you to send an Emergency Alarm, a non- voice signal, which triggers an alert indication on another radio. Procedure: 1 Press the programmed Emergency button or the
Emergency footswitch.
2 The display shows Sending Alarm, which alternates with
your radio ID. The green LED lights up and the Emergency icon appears on the Home screen display. An Emergency
Enter Tone sounds upon each retry.
3 When an Emergency Alarm acknowledgment is received,
the Emergency Acknowledgment Tone sounds and the green LED blinks. The display shows Emergency Alarm Successful. OR If your radio does not receive an Emergency Alarm acknowledgment, and after all retries have been exhausted, a tone sounds and the display shows Emergency Alarm Failed.
4 Radio exits the Emergency Alarm mode and returns to the
Home screen.
If your radio is set to Silent, it will not have any audio or visual indicators related to the Emergency feature.
Sending an Emergency Alarm with Call
This feature allows you to send an Emergency Alarm to another radio. Upon acknowledgment, both radios can communicate over a programmed Emergency channel. Procedure: 1 Press the programmed Emergency button or the
Emergency footswitch.
2 The display shows Sending Alarm, which alternates with
your radio ID. The green LED lights up and the Emergency icon appears on the Home screen display. An Emergency Enter Tone sounds upon each retry.
3 When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds and the green LED blinks. The display shows Emergency Alarm Successful.
4 Press PTT button to make the call. The display shows
Emergency, which alternates with your radio ID. The green LED lights up and the Emergency icon appears on the Home screen display.
