User's Manual

Identifying Status Indicators

English

LED Indicators

LED indicators show

the operational status

of your radio.

Blinking red – Radio is

receiving an

Emergency

transmission or has

failed the self-test upon

powering up.

Solid yellow – Radio is

in Permanent Monitor

mode, monitoring a

channel, or requested trunked call has no voice channel or

target is busy.

Blinking yellow – Radio is scanning for activity or receiving a

Call Alert.

Solid green – Radio is transmitting.

Blinking green – Radio is powering up, receiving a non-

privacy-enabled call or data, or detecting activity over the air.

NOTE: When the green LED blinks, it indicates the radio

detects activity over the air. Due to the nature of the

digital protocol, this activity may or may not affect the

radio's programmed channel.

Upon a PTT button press, if the radio is programmed

for polite operation, the radio automatically determines

whether a transmission is permitted via a Talk Permit

or a Talk Denial tone.

Audio Tones

Alert tones provide you with audible indications of the radio’s

status or the radio’s response to data received.

Red

Yellow

Green

Continuous Tone A monotone sound. Sounds

continuously until termination.

Periodic Tone Sounds periodically depending on the

duration set by the radio. Tone starts,

stops, and repeats itself.

Repetitive Tone A single tone that repeats itself until it is

terminated by the user.

Momentary Tone Sounds only once for a short period of

time defined by the radio.