User's Manual Part 2
Table Of Contents
- Scan
- Talkback
- PassPort Primary Auto Group Scan (PassPort Trunked Operation Only)
- PassPort Group Scan (PassPort Trunked Operation Only)
- Auto Group Scan (LTR Trunked Operation Only)
- All Group Scan (LTR Trunked Operation Only)
- System Scan (LTR Trunked and Conventional Operation Only)
- Deleting a Nuisance Channel/ Talkgroup (PassPort Group Scan or System Scan Operation Only)
- Editing a Scan List (PassPort Group Scan or System Scan Operation Only)
- Adding or Deleting Talkgroups or Channels in a Scan List
- Prioritizing a Talkgroup or Channel in a Scan List (System Scan Operation Only)
- Phone
- Voice Storage
- Audio/Tone Settings
- Utilities
- Warranty
- Quick Reference Card
72
English
PHONE
RECEIVING A PHONE CALL D
THROUGH A TRUNKED OR
CONVENTIONAL SYSTEM
To Receive a Phone Call
8 Press and release the PTT button, if
required for your radio.
9 Hold the radio in a vertical position with
the microphone 1 to 2 inches (2.5 to 5
cm) away from your mouth. Press the
PTT button to talk; release it to listen.
10 To disconnect a phone call, do one of the
following:
Enter the deaccess code using the DTMF
microphone keypad.
–or–
If your radio has the deaccess code
programmed, go to step 9.
11 To exit Phone Mode:
Press and hold # to disconnect the
call. D disappears from the display.
1 y o r z to select a LTR talkgroup or
conventional channel that has been
programmed for telephone.
–or–
Activate any scan type containing a tele-
phone talkgroup or channel (see page
59).
Note: No PassPort talkgroup or zone
selection is needed in PassPort
mode.
• When a phone call is received, a ring-
ing tone sounds, alerting you to
answer the phone call.
Note: The D also appears on the display in
PassPort mode.