User's Manual Part 2
Table Of Contents
- Scan
- Talkback
- PassPort Primary Auto Group Scan (PassPort Trunked Operation Only)
- PassPort Group Scan (PassPort Trunked Operation Only)
- Auto Group Scan (LTR Trunked Operation Only)
- All Group Scan (LTR Trunked Operation Only)
- System Scan (LTR Trunked and Conventional Operation Only)
- Deleting a Nuisance Channel/ Talkgroup (PassPort Group Scan or System Scan Operation Only)
- Editing a Scan List (PassPort Group Scan or System Scan Operation Only)
- Adding or Deleting Talkgroups or Channels in a Scan List
- Prioritizing a Talkgroup or Channel in a Scan List (System Scan Operation Only)
- Phone
- Voice Storage
- Audio/Tone Settings
- Utilities
- Warranty
- Quick Reference Card
71
English
PHONE
2 ) to enter menu mode.
3 y or z until
4 ) to select
D appears on the display when you are
in Phone Mode.
5 (For conventional operation with auto
access only). You hear a series of tones,
indicating that an access code is being
sent automatically, and see your access
code:
–or–
Enter your access code using the DTMF
microphone keypad.
6 When you hear a dial tone:
Enter the phone
number using the
DTMF microphone
keypad.
–or–
Phone
Phone
XXX-XXX-XXXX
y or z to
select a number
from the phone list.
–or– (see step 7)
7
a. Press and release the prepro-
grammed Speed Dial button (see
step 6) to use the Speed Dial fea-
ture.
b. Press the key (1 to 9) corresponding
to the number you want to call, or
press 0 if you want to call the last
number dialed.
Note: To redial the last number dialed (if
not using Speed Dial), press and
release the PTT button immediately
after the access code is sent. The
radio sends the last number dialed.
–or–
If you entered your access code
using the keypad, press
z once
to access the last number dialed;
then press and release the PTT but-
ton.
XXX-XXX-XXXX