User's Manual Part 2
Table Of Contents
- Scan
- Talkback
- PassPort Primary Auto Group Scan (PassPort Trunked Operation Only)
- PassPort Group Scan (PassPort Trunked Operation Only)
- Auto Group Scan (LTR Trunked Operation Only)
- All Group Scan (LTR Trunked Operation Only)
- System Scan (LTR Trunked and Conventional Operation Only)
- Deleting a Nuisance Channel/ Talkgroup (PassPort Group Scan or System Scan Operation Only)
- Editing a Scan List (PassPort Group Scan or System Scan Operation Only)
- Adding or Deleting Talkgroups or Channels in a Scan List
- Prioritizing a Talkgroup or Channel in a Scan List (System Scan Operation Only)
- Phone
- Voice Storage
- Audio/Tone Settings
- Utilities
- Warranty
- Quick Reference Card
69
English
PHONE
PHONE
Your radio allows you to place and receive
telephone calls through trunked and
conventional systems (depending on phone
line availability). Telephone calls through a
repeater allow only one person to speak at a
time.
MAKING A PHONE CALL D
THROUGH A TRUNKED SYSTEM
Note: The following instructions assume your
radio has been programmed as follows by
your dealer using CPS (Customer Program-
ming Software).
• Dial type: Live
• Access/Deaccess type: Immediate Auto
• Tone Span: Timed - 100 ms tone duration
To Initiate a Phone Call
Do the following:
1 Select a trunked zone and talkgroup that
have been programmed for telephone.
2 ) to enter menu mode.
–or–
Press the preprogrammed radio or DTMF
microphone Phone button, and skip to
step 5.
–or–
a. Press and release the Speed Dial
button to use the speed dial feature.
b. Press the (1 to 9) key corresponding
to the number you want to call on the
Phone list. Or press 0 if you want to
call the last number dialed.
c. Press the PTT button. A dial tone
sounds.
d. Press the PTT button again to send
the phone number.
–or–
For LTR trunked systems, press and hold
the PTT button while dialing a number.
3 y or z until
4 ) to confirm
Phone
Phone