User's Manual Part 2

Selecting a Trunked Zone and Talkgroup
1. Turn Zone Selector knob to appropriate trunked zone.
Sending a Trunked Call
1. Press PTT. If trunked system access was successful — LED = steady red;
if unsuccessful — LED = flashing red; low pitched tone sounds.
2. Speak clearly into microphone. Release PTT to listen.
Initial PassPort System Registration
Selecting a Conventional Zone and Channel
1. Turn Zone Selector knob to appropriate conventional zone.
Sending a Conventional Call
1. Press PTT and speak clearly into microphone. LED = steady red while call is being sent.
Release PTT to listen.
Receiving a Trunked or Conventional Call
1. Turn Zone Selector knob to desired trunked or conventional zone. Make sure PTT is
released. When a call is received, the LED flashes red.
Making a Selective Call (Trunked Operation Only)
1. From Selective Call menu, select or enter desired radio ID number.
2. Press PTT to send the call. The radio sounds a continuous tone. Press PTT and talk;
release PTT to listen.
Receiving a Selective Call (Trunked Operation Only)
• When a Selective Call is received, the radio displays F symbol and name or ID of calling
radio; the LED flashes yellow. Press PTT to answer.
Upon power up, PassPort alias appears on the display.
The selected talkgroup alias appears on the display.
May appear if a PassPort site cannot be quickly
located.
Appears indicating successful PassPort registration
(XXX = PassPort site on which you are registered).
Selected talkgroup alias appears and remains on the
display upon successful registration.
3$663257
<2857/.*53$/,$6
6($5&+,1*
5(*6,7(;;;
7/.*53$/,$6
HT1250•LS
+™
Radio Quick Reference Card
Record the functions for your radio’s programmable buttons in the table provided below. For further
information, see pages 22 and 24 in this User’s Guide.
Display
Microphone
(programmable)
Side Button 2 (B)
(programmable)
Top Button (D)
LED Indicator
Push-to-Talk
Button
(programmable)
Side Button 1 (A)
Zone Selector Knob
On/Off Volume Knob
Menu Keys
(programmable)
Keypad
(programmable)
Side Button 3 (C)
(P1, P2, P3)
Button Function Short Press Long Press
Hold Down Page