User's Manual Part 2

89
English
UTILITIES
SETTING THE POWER LEVEL B
Each channel in your radio has a predefined
transmit power level that can be changed.
• High power (S) allows you to reach a radio
that is farther away.
• Low power (R) conserves the battery’s
charge.
• Auto power (conventional operation only)
automatically sets the optimal power level
based on the strength of the signal
received. If the received signal is weak, the
transmit level will be set to high, and vice-
versa.
Note:
• Be aware that a message received from a
nearby radio might change your radio’s
power level to low. This may cause radios
that are farther away not to receive your
transmissions.
• In PassPort mode, the power level is pre-
defined radio wide.
To Set the Power Level
Press the preprogrammed Power Level button
(see page 24) to toggle between low and high,
–or–
Do the following:
1 ) to enter menu mode.
2 + or ? until
3 ) to select
4 + or ? until
5 ) to select
The display shows the current power level.
6 + or ? u n t i l
–or–
until
–or–
until
7 ) to confirm the selection.
8WLOLWLHV
8WLOLWLHV
3RZHU/HYHO
3RZHU/HYHO
3RZHU+LJK"
3RZHU/RZ"
3RZHU$XWR"