User's Manual

For the RX outputs, there is only 1 which is connected to the accessory connector. RX Audio 1 on
pin 7 (to be used for analog and slot 1 digital).
3.5
Station Control Interface
This section describes the different types of connectors and connections to the station control.
3.5.1
Bottom Panel Connections
See Ethernet
on page 54 for details.
3.5.2
Expansion Board Interface Connector
The expansion board interface utilizes a 30-pin vertical LIF connector. The location is detailed in Figure
10: SLR 1000 Repeater Transceiver Board Connector Locations on page 45. Table 11: SLR 1000
Repeater Front View (without top Cover) Callout Legend on page 45 shows the pin number locations.
MN003557A01-AA
Chapter 3: SLR 1000 Transceiver Board
Send Feedback 49
Preliminary FCC Filing