User's Manual

LED Definition

Ethernet Link/ Network Connectivity

Reference

Table 10: SLR 1000 Front Panel LED Definitions

LED Function

Name

LED Col-

LED State Status Indication

Power/Status Off Off Off

Green Solid Operating Normally, with DC power

Red Flashing Repeater is Disabled (by customer)

Solid Not Operational – Major Alarm

Amber Flashing* Check Alarm Log – Alarm occurred and cleared

but remains latched (configurable)

Solid Repeater Operational – Minor Alarm

Ethernet/ Network

Connectivity

Off Off No Ethernet connection

Green Solid Connectivity/ Linked

Flashing Attempting to connect to the system

Reference Off Off For future use

NOTICE: All LEDs flashing in unison indicate the repeater is booting up.

The RDAC application will be needed when the Status LED is red (solid or flashing). This status

indicates a minor or major alarm. The RDAC application is used to identify the specific alarm

and probable diagnosis to aid in identifying the FRU at fault.

(*) Not supported in initial release.

MN003557A01-AA

Chapter

1: SLR 1000 Repeater

Send Feedback 41

Preliminary FCC Filing