User's Manual

• Physical Dimensions: 11" H x 9" W x 4" D (27.94 x 22.86 x 10.16 cm) without brackets or other
peripheral equipment
•
Weight: 10 pounds (4.56 kg) excluding cabinet or other peripheral equipment
Motorola Solutions Network Interface:
• IP Site Connect
• Repeater Diagnostics and Control (RDAC)
• Capacity Plus
• Connect Plus
• Capacity Max
Third Party Controller Interface:
• Tone Remote Adapter
In addition, the following features are also included. These features are shipped in a preset condition,
but may be altered through the use of Radio Management.
• 64 Tx/Rx Frequencies – Factory Programmed with 1 Tx, 1 Rx
• 12.5 kHz or 25 kHz Operation – Factory Programmed to 12.5 kHz
• 1 Tx and 1 Rx (PL or DPL) Squelch Code per channel – Factory Programmed to CSQ
• Base Station Identification (BSI) – Factory Programmed as “BLANK” (“BLANK” disables BSI)
• Push-To-Talk (PTT) Priority – Factory Programmed to Repeat Path
1.4
Frequency Ranges and Power Levels
The SLR 1000 Repeater is available in the following frequency ranges and power levels as specified in
Table 6: SLR 1000 Frequency Ranges and Power Levels on page 36.
Table 6: SLR 1000 Frequency Ranges and Power Levels
Frequency
Band
Bandwidth Power Level
UHF 400 – 527 MHz 1 – 10 W
1.5
Specifications
Table 7: SLR 1000 Repeater General Specifications (All Bands)
on page 36 shows the specifications
of the SLR 1000 Repeater.
Table 7: SLR 1000 Repeater General Specifications (All Bands)
Parameter Specifications
Number of Channels 64
Frequency Generation Synthesized
Input Voltage DC 10.8 – 15.6 VDC
Station Weight 10 lbs (4.56 kg)
Table continued…
MN003557A01-AA
Chapter 1: SLR 1000 Repeater
36 Send Feedback
Preliminary FCC Filing